Owner’s Manual

A
IN BRIEF
I
19
Holding the seat belt
(3-door model)
Raise then lock part A, to retain
the seat belt buckle when it is
unfastened.
It is necessary to remove the
seat belt from the buckle retainer
before moving the seat to access
the rear seat positions.
As a matter of safety, these actions should not be attempted
when the vehicle is moving.
Seat belt height adjustment
(5-door model)
The correct positioning for the
seat belt anchorage is mid-shoul-
der height (see chapter USER
PRECAUTIONS).
To adjust it, pinch the control and
slide it in the desired direction.
Both the height and reach of the
steering wheel can be adjusted.
With the vehicle at rest, first
adjust the seat to the most suitable
position, then adjust the position
of the steering wheel.
See “Driving position”.
Unlock the steering by pulling the
control towards you. Adjust the
steering wheel position then lock
by pushing the control fully down-
wards.
If you press firmly downwards on
your steering wheel after locking,
you may hear a slight click. The
steering is then in its definitive
position.
S E A T B E L T H E I G H T A D J U S T M E N T
S T E E R I N G C O L U M N A D J U S T M E N T