Owner’s Manual

43
43
V
A
B
T E L E P H O N E
G E NE R A L
Enter the
PIN
code on the keypad.
Rotate the control to select OK.
Press on the control to validate.
•
•
•
Press on control
A
with a ballpoint to eject
the support
B
.
Place the SIM card on the support
B
.
Insert the support
B
.
Note:
Switch off the NaviDrive before removing
the SIM card (key in position
S
(Steering
lock) and display off).
The card has to be present in order for
certain functions to work properly.
•
•
HOW TO DEBLOCK THE TELEPHONE ?
After three entry errors, the telephone will
be blocked.
Enter your PUK code to deblock the tel-
ephone.
Note:
The PUK code is supplied by the ven-
dor of your SIM card. The entering of the PUK
code tolerates 10 errors in succession.
After that, the SIM card will be defi nitively
unusable.
Contact your telephone operator.
Depending on countries and operators, you
may be able to benefi t from having 2 SIM
cards at a discounted rate. These 2 cards
have the same call number and the same
messaging. Calls arrive as priority on your
principal line. If the telephone containing the
principal SIM card is switched off, the calls
are transferred automatically to the equip-
ment with the second SIM card.
On first installation or for updating your
directory:
Insert the SIM card from your mobile
telephone.
Transfer the information to the directory
of your NaviDrive.
Insert the twin SIM card.
•
•
•
This transfer necessitates a callback
(consult your telephone service opera-
tor.
For the services to operate at their
best, it is recommended to have the
principal SIM card inserted in your
NaviDrive.
Your NaviDrive can defi nitively
memorise the PIN code of a SIM
card. Once the memorisation
is accepted, your PIN code will
only be requested the fi rst time
you do an entry.
HOW TO INSTALL AND REMOVE THE
SIM CARD ?
HOW TO ENTER THE PIN CODE ?
RECOMMENDATION FOR INSTALLING A
TWIN SIM CARD
Your SIM card has to be valid.
Before starting a call, make sure that
you are in an area covered by your
telephone operator.