Owner’s Manual

1
A
B
2
II
41
Your vehicle may be equipped with
an ANTI-INTRUSION ALARM.
This ensures:
• Exterior perimeter protection
by means of detectors on the
access points (doors, tailgate,
bonnet) as well as on the electri-
cal supply.
• Interior volumetric protection
by means of ultrasonic sensors
(detecting movement inside the
passenger compartment).
This can be deactivated using
control 1.
The installation also includes a
siren and a warning lamp 2 visible
from the outside, indicating the
three possible alarm statuses:
• Alarm not armed (not on
standby), warning lamp off.
• Alarm armed (on standby), the
warning lamp flashes slowly.
• Alarm triggered (signal of an
intrusion), the warning lamp
flashes rapidly if the alarm is dis-
armed with a press on button B.
It stops flashing as soon as you
switch on the ignition.
Note: if there is a malfunction the
warning lamp comes on perma-
nently.
DISARMING THE ALARM
USING THE REMOTE
CONTROL
The alarm is disarmed when you
unlock the vehicle (by pressing
button B on the remote control).
DISARMING THE ALARM
USING THE KEY
Unlock the doors with the key. The
siren is triggered. Enter the vehicle
and switch on the ignition to stop
the siren. Otherwise the siren will
continue for about 30 seconds.
A N T I - I N T R U S I O N A L A R M