Owner’s Manual

C
B
II
49
Dashboard lighting
The rheostat is active if the sidela-
mps are on and applies to:
- the instrument panel
- the displays
- the rev counter
The desired brightness is selected
via control A or by pressing con-
trol B.
With control B, press until the
brightness is at maximum.
Release, press until you reach
minimum.
Dark button
After the first press on control C,
only the top part of the display
remains illuminated.
A second press on control C trig-
gers black panel mode.
Black panel
(with headlamps on)
This function switches off certain
of the displays, for night driving. It
can be activated:
- either by 2 presses on control C
- or by 1 press on control D if this
control has been programmed
with the black panel function.
The instrument panel continues to
show vehicle speed as well as the
cruise control and speed limiter
functions if these are activated.
If there is an alert or a modification
of functions or adjustments, black
panel is interrupted.
To programme control D:
- give a long press on control D,
- then select the black panel func-
tion on the multifunction display,
using the arrow controls of your
Radio/CD or NaviDrive system.
Validate with a press on «OK».
Note: the lighting rheostat still
operates in black panel mode.
D A S H B O A R D C O N T R O L S