Owner’s Manual

II
65
Control using the gear lever
Position the gear lever in posi-
tion M, then :
- push the lever to engage a higher
gear,
- pull the lever to change down.
Controls at the steering wheel
Place the gear lever in position M,
and then the controls at the steer-
ing wheel will give you access to
the six gears in forward drive.
To change gear:
- Press behind the control “+” at
the steering wheel to engage a
higher gear.
- Press behind the control “-” at
the steering wheel to change
down.
Note: These controls at the steer-
ing do not permit you to select
neutral or reverse gear.
Observations:
When the vehicle is braking or
reducing speed, the gearbox
changes down automatically to a
suitable gear.
In manual mode, it is not neces-
sary to release the accelerator
during changes of gear.
Changes of gear are accepted only
if consistent with engine speed.
Under heavy acceleration, a higher gear will only be engaged
when the driver actions the gear lever or the controls
at the steering wheel.
6 S P E E D E L E C T R O N I C G E A R B O X S Y S T E M
M A N U A L M O D E