Operation Manual

ManualsBrandsCitronic ManualsAudioDSM2-6 mk II

DSM2-6mkII

DIGITAL SPEAKER MANAGEMENT

170.659UK

Features

 96kHz sampling frequency, 32-bit A/D and D/A converter, 24-bit DSP processor

 Input channel: 6-band parametric EQ, Delay, Polarity

 Output channel: Signal select, 6-band parametric EQ, Gain, Delay, Polarity, Crossover, Limiter

 Built-in USB and RS485 com ports

 Program function, recall and copy

 30 internal user programs

 Password protection

Summary of content (7 pages)

PAGE 1
DSM2-6mkII DIGITAL SPEAKER MANAGEMENT 170.
PAGE 2
Introduction Thank you for purchasing this high quality Citronic digital speaker management system. The aim of our audio processing range is to offer cost-effective, high performance sound sculpting tools for live sound reinforcement and installation applications. The Citronic DSM2-6 offers a comprehensive and professional speaker management solution delivering unsurpassed sound quality.
PAGE 3
Applications Use the DSM2-6 to control and distribute the signal to up to 6 amplifier channels driving different speaker arrays.
PAGE 4
Front Panel 1. 2. 3. 4. 5. 6. 7. 8. MUTE/EDIT buttons for Input channels (CH A, CH B) MUTE/EDIT/LEVEL indicators for Input channels (CH A, CH B) Main LCD display Data wheel Parameter & System buttons MUTE/EDIT/LEVEL indicators for Output channels (CH 1 - CH 6) MUTE/EDIT buttons for Output channels (CH 1 - CH 6) USB input Rear Panel 9. 10. 11. 12. 13.
PAGE 5
6) For speakers which are to be placed at long distances apart, sometimes it is necessary to “time align” the signals from these so that the sound wave from each arrives at the listener at the same moment. This can be achieved by pressing the “DELAY” button and applying a delay to the speaker output nearest to the listener, avoiding the “doubling” effect that can result from distant speakers.
PAGE 6
System Menu Repeated pressing of the SYSTEM button gives access to the following settings… SYSTEM SETUP MENU 1. 1. Device ID Setup SYSTEM SETUP MENU 2. 2. Password SYSTEM SETUP MENU 3. 3. Power On Setup SYSTEM SETUP MENU 4. 4. Backlight Setup SYSTEM SETUP MENU 5. 5. Current Program SYSTEM SETUP MENU 6. 6. System Information 1. Device ID setup For setups using multiple DSM2-6 mkII units togther, they can be addressed by a single computer via the RS485 interface.
PAGE 7
Maintenance and Servicing There are no user serviceable parts inside this unit. General case cleaning may be recommended using a dry or slightly damp cloth and connectors should be checked periodically for good electrical contact. Any attempt to open and modify or repair the circuitry of this unit will void the warranty. Refer all repair and servicing to qualified personnel and all warranty issues must be handled by the retailer where the unit was purchased.