Manualshelf

Operation Manual

ManualsBrandsCitronic ManualsAudioDSM2-6 mk II
1234567
System Menu
Repeated pressing of the SYSTEM button gives access to the following settings…
1. Device ID setup
For setups using multiple DSM2-6 mkII units togther, they can be addressed by a single computer via
the RS485 interface. It will be necessary to set the device ID of each DSM2-6 mkII so that they can
each be edited in turn by the computer. The included software has the ability to switch between
DSM2-6 mkII units by entering the particular device number when syncing with the computer.
2. Password
Here it is possible to set up and enter the user password to protect programs from being edited by
unauthorised persons.
3. Power on setup
The user can choose whether or not to mute all channels whenever the DSM2-6 mkII is powered up.
This can help to avoid unwanted noises through the amplifiers when powering up a system.
4. Backlight setup
The user can set the backlight “auto-off” when there is no front panel activity.
5. Current Program
Allows the user to set the program status at power up.
6. System information
Details of hardware/firmware type for reference