Warranty

TAKE-DOWN INSTRUCTIONS
1. Remove all stakes from interior and exterior of
the screen tent(11x).
2. Remove vertical door support rods from pockets
at the bottom of the panel, pull apart, and refasten
them to storage positions located diagonally on the
panels immediately next to each side of the door
with Velcro straps(2x).
3. Pull down on top hub loop (on the inside of the
tent), causing it to relax.
Step 2
4. Push in on all side panels until screen tent is fully
collapsed and laying flat on the ground.
5. Once shelter is laying flat on ground, carefully lift
and insert into the carry bag-paying attention not to
twist or distort flex rods and fabric while inserting
into bag. Place stakes into their bag and put the
stake bag into the carry bag as well.
Step 4