Owner`s manual
Note:Be sure to read this chapter referring to the front diagrams
of
chapter
"3.
CONTROLS" on page 5 (unfold).
1.
f)PEBAIIONS
;]
IfIll
M
if
iF;
Clock display
Setting
the Z-Enhancer Plus
This unit are provided with 4 types of sound tone ef-
fects stored
in
memory. Select the one you prefer.
* The factory default setting is "Z+ OFF".
Each
time
you press the [Z+] button,
the
tone ef-
fect
changes
in the follOWing order:
Main display
Once selected, the preferred display becomes
the display default. When a function adjust-
ment such as volume is made, the screen will
momentarily switch to that function's display,
then revert back to the preferred display sev-
eral seconds after the adjustment.
When you have entered a title
in
a
CD,
it ap-
pears
in
the main display. If you have not en-
tered a title,
"NO TITLE" appears
in
the title
display instead. For information
on
how to en-
ter a title, refer to the subsection
"Entering
titles"
in
section
"Operations
Common
to
Each Mode",
Switching
the
display
Press the [DISP] button to select the desired dis-
play.
Each
time
you press the [DISP] button,
the
dis-
play switches in the following order:
Main display
Adjusting
the volume
Turning
the
[ROTARY]
knob
clockwise
increases
the
volume; turning it
counterclockwise de-
creases
the
volume.
*The volume level
is
from 0 (minimum) to 33 (maxi-
mum).
Selecting
a
mode
1.
Press
the
[FNC] button to
change
the opera-
tion mode.
2. Each time you press the
[FNC]
button, the
operation
mode
changes
in
the
following or-
der:
Radio
mode
-+
SIRIUS
mode
-+
CD/MP31
WMA
mode
-+
CD
changer
mode
-+
MD
changer
mode
-+
DVD
changer
mode
-+
TV
mode
-+
AUX
mode
-+
Radio
mode
...
External equipment not connected with
CeNET is not displayed.
Turning
on/off
the
power
Note:
• Be careful about using this unit for a long time
without running the engine.
If
you drain the car's
battery too
far,
you may not be able
to
start the
engine
and
this can reduce the service life
of
the
battery.
1. Press
the
[FNC] button.
2.
The
illumination
and
display on
the
unit light
up.
The
unit automatically
remembers
its last
operation
mode
and will automatically switch
to display
that
mode.
3.
Press and hold the [FNC] button for 1 second
or
longer
to turn off
the
power
for the unit.
Note:
• System check
The first time this unit
is
turned on after the wire
connections are completed, it must be checked
what equipment is connected. When the power is
turned
on,
"SYSTEM
CHK"
and
"Push POWER"
appear in the display alternately,
so press the
[FNC] button.
The
system check starts within the
unit. When the system check is complete, press
the [FNC] button again.
Be
sure
to
lower the volume before switch-
ing
off
the
unit
power
or
the
ignition
key. The
unit
remembers
its
last
volume
setting. If you
switch
the power
off
with
the
volume up,
when you
switch
the
power
back
on, the sud-
den
loud
volume may
hurt
your
hearing and
damage the unit.
12
DXZ635MP