Owner`s manual
Selecting a DISC
[ON] or [UP] button correspond to a disc load
in
the changer.
1.
Press the [ON] or [UP] button to select the
desired disc.
'"
If
a
CD
is
not
loaded
in
a slot of magazine,
"NO
DISC" appears
in
the
display.
Procedure to
scroll
a title
Set "SCROLL" to "ON" or "OFF".
(The factory default setting is "ON". Refer to the
subsection
'Turning
the
screen
saver
function
on
or
off"
in
section
"Operation
common
to
each mode".)
• When
set
to
"ON"
The title is automatically kept scrolling.
• When
set
to
"OFF"
Press the [TITLE] button to scroll the title.
Switching
disc
titles
and
track
titles
(MD)
This unit can display disc titles and track titles
already entered on MDs.
I·
Titles cannot
be
entered
for
MDs with this unit.
1.
Press [DISP] button to display the title. The
disc title or track title is displayed.
2.
Each time you press and hold the [OISP] but-
ton for 1 second or longer, the display
toggles between the disc title and the track
title.
Note:
• If an MD is not input its disc title or a track title,
"NO TITLE" appears
in
the display
Displaying CD titles
This unit can display title data for CD-text CDs
and user titles input with this unit.
Title data
for
CD-text CDs
can
be
displayed
with
this unit only
when
it
is
connected
to
CDC655Tz.
• When
connected
to
COC655z
or
COC1255z.
Press the [OISP] button to display the title.
•
When
connected
to
COC655Tz
1.
Press the [OISP] button to display the title.
2.
Each time you press and hold the [DISP] but-
ton for 1 second or longer, the title display
changes
in
the following order:
User title (disc)
~
CD-teet title (disc)
~
Artist
title
~
CD-text title (track)
~
User title (disc) ...
Pausing
play
1.
Press the
[~II]
button to pause play.
"PAUSE" appears
in
the display.
2.
To
resume
play,
press the
[~II]
button again.
CO-ROM
discs
cannot
be
played
from
every
CD
changer,
it's
depended
on
the
model.
_C_O_VM_D_C_h_a_n-=g~e_r_o":''P_e_ra_t_io_n_s
1
CD/MD
changer
functions
Notes:
When an optional CD/MD changer is connected • If the CO playing is not a CD-text
CD
or no user
through the CeNET cable, this unit controls all title has been input, "NO TITLE" appears in the
CD/MD changer functions. This unit can control display
a total of 2 changers. •
If
a CD-text
CD
is
not
input its disc title
or
a track
title, "NO TITLE" appears in the display
Press the [FNC] button and select the CD(MD)
changer mode to start play. If 2 CD(MD) chang-
ers are connected, press the [FNC] button to se-
lect the CD{MD) changer for play.
':'
If
"NO
MAG"
appears
in
the
display,
insert the
maga-
zine into the
CD
changer. "DISC CHECK" appears
in
the display while the player loads (checks) the
magazine.
':'
If
"NO
DISC" appears
in
the
display,
eject
the
maga-
zine and insert discs into each slot. Then, reinsert
the magazine back into the
CD
changer.
:'
If
"NO
DISC" appears
in
the display, load
MDs
into
the
MD
changer.
Note:
• Some COs recorded
in
CD-RICD-RW mode
may
not be usable.
OXZ635MP
23