Owner`s manual
I
Source unit connector
Note:
Q
If
the DCP is dirty, wipe off the dirt with a soft, dry
cloth only.
• The OCP can
easily
be
damaged
by
shocks.
After
removing
it, be careful
not
to
drop
it
or
sUbject
it
to
strong
shocks.
• When the Release
button
is
pressed
and
the
DCP
is
unlocked,
the
car's
vibrations
may
cause
it
to
fall. To
prevent
damage
to
the
OCP,
always
store
it
in
its
case after de-
taching
it. (ee
figure
below.)
• The
connector
connecting
the
Source
unit
and
the
DCP
is
an
extremely
important
part. Be careful
not
to
damage
it
by press-
ing
on
it
with
fingernails,
screwdrivers,
etc.
Storing
the DCP
in
the DCP Case
Hold the OCr,
in
the orientation as shown
in
the
figure below, and put it into the supplied DCP
case. (Ensure the DCP is in the correct
orienta~
tion.)
5.DCP
" "
Attaching
the DCP
1.
Insert the right side of the DCP into the
Source unit.
2.
Insert the left side of the DCP into the
Source unit.
3.
Remove the
DCP.
Removing
the DCP
1.
Press the [FNC] button for 1 second or
longer to switch off the power.
2,
Press
in
the [RELEASE] button.
[RELEASE] button
[it~.
The control panel can be detached to prevent
theft. When detaching the control panel, store it
in
the DCP (DETACHABLE CONTROL PANEL)
case to prevent scratches.
We recommend taking the DCP with you when
leaving the car.
DXZ635MP
9