User's Manual

turns the handset speaker On and Off. It
can also be used to answer incoming calls.
For best results, after turning this function
On and the handset is out of the cradle,
place the handset face down or on its side
so that the speaker grille is not blocked.
 AMPLIFY button. This button turns the
extra amplification On and Off. Press it to
put the handset amplifer into the On mode
for maximum volume boost. In the On
position, the button is backlit and the maxi-
mum amplification is 40dB.When it is Off,
the backlight goes out and the maximum
amplification is approximately 18dB.
 CHANNEL / SETUP button.
a. This button is used for switching
channels when there is interference on
the line.There are 40 channels. If there
is interference on the line, pressing this
button will move to another channel
which should bring much improved
clarity of reception.
b. Pressing CHANNEL for three (3) seconds
will initiate the SETUP mode.You will see
this indicated on the LCD display.
Handset Controls, Functions
and Features
There are controls on either side of the
handset and they are listed below.
Left Side:
 RINGER OFF/ON. This switch turns the
handset ringer On and Off.
 REMOTE jack. This 3.5 mm jack is for use
with optional remote devices such as an
Ameriphone ER Pillow Switch or Air Switch.
 VOL slide switch. When AMPLIFY on the
handset is Off, this volume control provides
amplification from 0 to 18dB. When
AMPLIFY is On, the volume control allows
you to adjust the amplification up to 40dB.
Right Side:
 TONE LO HI. Adjusts the tone to help
you better understand incoming voice on
the handset.The TONE control provides
clarity, especially with similar sounding
words. It is only functional when AMPLIFY
is on.
 AUDIO jack. 3.5mm jack used for
connecting other assistive listening devices
such as neckloop, cochlear implant or
Personal Computer speaker.
6
Features – Handset
 VOL slide switch
 DETACHABLE
BELT CLIP
 REMOTE jack
 RINGER
ON/OFF switch
Handset
Left Side