User's Manual

CAUTION: Place the telephone and
power cords where they will not
interfere with movement, be damaged
or create a fire or other electrical hazard.
Wall Mounting
You may want to mount the base of your
CLS45i on a wall.
1. Turn the phone over so that the bottom is
facing you.
2. Attach the phone mounting bracket to the
bottom of your phone base as shown in
illustration  by first inserting the tabs of
the bracket into the slots on the phone
base.Then, push the bracket in and down
firmly until it snaps into place.
3. Locate a desired wall phone jack near an
AC outlet. Notice the position of the two
(upper and lower) protruding nail or screw
heads as shown in illustration .These
heads fit into the slots on the bottom of
the mounting bracket and hold the phone
on to the wall. Plug the short phone line
cord into the wall jack as shown.
4. Hold the base unit of the phone upright
then angle it downwards. Feel for the lower
protruding nail or screw head and insert
this head into the lower hole on the
mounting bracket as shown in .
5. Next, insert the upper phone bracket onto
the upper head. Slide the phone down until
it is firmly in place on the wall. See .
6. Once the phone is firmly in place on the
wall, attach the short line cord to the
phone, plug the AC adapter into the phone,
and attach the phone’s handset as shown in
.
13





Installing and Using Your CLS45i