User's Manual

Deleting Selected Caller ID
Information
1. While reviewing the Caller ID, press
DELETE to delete the displayed caller
information.The display flashes “ERASE ?”
2. Press INTERCOM to select.The display
briefly reads “CID ERASED.” The next
Caller ID entry appears automatically or
the display reads,“- NO CALLS -” if the list
is empty.
Deleting All Caller ID
Information
1. While reviewing the Caller ID, hold down
DELETE for two seconds.The display flashes
“ERASE ALL ?”
2. Press INTERCOM to select.The display
briefly reads “ALL CID” and “ERASED” and
then “— NO CALLS —”.
At any time, you can press FLASH one time to
return to standby mode. Or it will return to
standby automatically when 30 seconds has
elapsed without any keys being pressed.
Saving Caller ID Information
to Memory
1. While reviewing Caller ID, press MEM
button.The display reads “SAVE TO” and
“MEMO?”
2. Press INTERCOM to select.Then the
display reads “ENTER MEMO” and
“LOCATION.”
3. Enter location number [X] (0 through 9).
a. If the memory location [X] is empty, the
display reads “SAVE AT” and “MEMO
X?”
b. If the memory location [X] is not empty,
display flashes “OVERWRITE” and
“MEMO X?”
4. Press INTERCOM to select. Both the
phone number (up to 16 digits) and caller’s
name (12 characters) will be stored in that
memory location. Or press FLASH to exit.
20
Caller ID Functions
SAVE TO
MEMO?