Cordless Telephone User Manual

XLC3.5HS/B

Difculty in placing or receiving calls:

• Move closer to the base and try again.

• Make sure you have selected the correct dialing mode, tone

or pulse.

• Make sure the handset battery is fully charged.

Screen displays “Battery Low”:

• Handset batteries are low on charge; return the handset to the

base to recharge the batteries.

TALK button is blinking green (fast pace):

• The base is trying to locate the handset; press TALK to

end the FIND paging process and return the handset to the

base.

Your handset screen is displaying “Searching...”:

• Move closer to the base.

• To register the XLC3.5HS/HSB, place the XLC3.5HS/HSB

handset into the main unit until the screen displays: Handset

Registered. It will take approximately 5-10 seconds for the

handset to register to the base.

• Verify that the AC adapter is plugged into the base and into the

wall outlet.

• The handset is out of range or the power to the base is

unplugged.

• Place the handset into the base until the screen returns to

standby mode. It will take approximately 5-10 seconds for the

handset to register to the base.

• Handset may need to be re-registered to the base manually.

Follow the instructions on page 8.

TROUBLESHOOTING