Instruction Manual

FORM-ENG-0018 REV A 05-27-03
607 NW 27th Ave
Ocala, FL 34475
Ph: 352-629-5020 or 1-800-533-3569
Fax : [phone] or 1-800-520-3473
TECHNICAL DATA SHEET
PAGE
22 OF 26
DATE
3/28/2012
PRODUCT GROUP
THROTTLE CONTROL
P/N 117155 REV
1.23
PRODUCT
TOTAL PRESSURE GOVERNOR (TPG)
BY AMS
Manual P/N 117684
5.2.41. ENGINE ID (Source ID of received engine messages)
This menu item allows configuration of the CAN source ID for engine messages received by the TPG.
The display will show
EngineID=X. Use the INC and DEC switches to adjust the CAN engine source ID.
If the TPG continuously displays the NO COMM DATA message with the engine running and the CAN bus
connected verify the setting of this parameter. Where the TPG is directly connected to the engine’s CAN bus the
address should usually be 0 but if there is a gateway module between the engine and TPG then this parameter
needs to be set to the address from which the gateway module transmits.
Range = 0 – 255. [default = 0]