Owner's manual

ManualsBrandsClass1 ManualsCarES-Key-USM

Pressing [ESC] will display the Select Network I/O, Modules or Vocation Select Menu.

Locating all the modules in the system can let you know if there are any communications

problems and where they might be located.

SCROLL

ESC

MOD:POWER ADDR:00

STATUS: LOCATED

v1.01 PDM 8-Relay

Msg/sec:Tx=XX Rx=XX

SCROLL

ESC

MOD:INPUT ADDR:00

STATUS: NOT LOCATED

SCROLL

ESC

MOD:DISPLAY ADDR:00

STATUS: LOCATED

v1.03 Display 1

Msg/sec:Tx=XX Rx=XX

SCROLL

ESC

=MOD:VOCATION/INTLK

STATUS: LOCATED

v1.01 PTO/Drive Gear

Developer’s Module

SCROLL

ESC

=MOD:DATA LOGGER

STATUS: LOCATED

v1.01 Data Logger

Developer’s Module

The display will indicate the Device Type, it’s

address, communications status, software

version, module type and the number of mes-

sages per second sent and received.

Scroll through all the modules in the data-

base to verify that they are on-line.

NOTE 1: THE CONTROL MODULE WILL ONLY LOOK FOR DEVICES THAT ARE CONTAINED IN THE ACTIVE DATABASE.

ANY MODULE WITH A STATUS: NOT LOCATED SHOULD BE INVESTIGATED.

IF AN UNKNOWN MODULE APPEARS, THE DATABASE IS MORE THAN LIKELY CORRUPT.

The [NET] menu opens a selection window

for information on the network modules, in-

puts, outputs or the vocation module.

Pressing [MOD] allows individual modules

to be queried and module information to be

displayed.

SCROLL

ESC

Module Menu

Select Network I/O,

Modules, or Vocation

[MOD] [I/O] [VOC]

SCROLL

ESC

fåÑçêã~íáçå=çå=Å~êÇIfåÑçêã~íáçå=çå=Å~êÇI

fåÑçêã~íáçå=çå=Å~êÇI

åÉíïçêâ=çê=ëóëíÉã\åÉíïçêâ=çê=ëóëíÉã\

åÉíïçêâ=çê=ëóëíÉã\

=x=x

kbqkbq

kbq

z==xpvpz==x`^oazz==xpvpz==x`^oaz

z==xpvpz==x`^oaz

Information on card,

network or system?

[NET] [SYS] [CARD]