Specifications

7
LABELS
SET-UP
To prevent injury, wear appropriate eye protection and
stand clear when cutting banding. Banding is under ten-
sion and may snap back when cut.
1. Remove crate top, sides and plastic covering unit.
Remove the banding attaching the Sodcutter to
the pallet.
2. Roll the Sodcutter off the pallet. The unit can also
be driven off the pallet, but rst read the Safety,
Controls, and Operation sections of this manual,
then check the oil and add gas.
3. Dispose of pallet, crate, plastic and banding in a
responsible manner.
Moving blades/blade
arms
cut/crush Hazard
Stay clear of blade/
blade arms while
operating.
Stop engine before
servicing
or adjusting.
ROTATING PARTS:
Entanglement / Amputation Hazard
Do not operate with cover removed.
Stop engine before servicing.
ATTENTION:
• Read Operator Manual
before servicing or repairing.
• Remove spark plug wire
before servicing or repairing.