Use and Care Manual

ManualsBrandsClassic Accessories ManualsOutdoor Power EquipmentPower Care Snow Thrower Cab

52-208-010401-PL

THANK YOU

We appreciate the trust and conﬁdence you have placed in PowerCare through the purchase of this snow thrower cab. We strive to

continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home

improvement needs. Thank you for choosing PowerCare!

Questions, problems, missing parts?

Before returning to the store, call PowerCare Customer Service 8 a.m.–6 p.m, EST, Monday-Friday

1-866-308-3976

HOMEDEPOT.COM

17cH55_20778

USE AND CARE GUIDE

POWERCARE: Universal SL Snow Thrower Cab

Summary of content (8 pages)

PAGE 1
52-208-010401-PL USE AND CARE GUIDE POWERCARE: Universal SL Snow Thrower Cab Questions, problems, missing parts? Before returning to the store, call PowerCare Customer Service 8 a.m.–6 p.m, EST, Monday-Friday 1-866-308-3976 HOMEDEPOT.COM THANK YOU We appreciate the trust and confidence you have placed in PowerCare through the purchase of this snow thrower cab. We strive to continually create quality products designed to enhance your home.
PAGE 2
TABLE OF CONTENTS Safety Information....................................................................................................................................................................................................................2 Package Contents List (Parts and Hardware)..........................................................................................................................................................................3 Tools Needed....................................
PAGE 3
PACKAGE CONTENTS LIST (PARTS) Q S Q S L A K T U B J J (2 each) (2 each) E F Q M G H M8 X 30 HEX BOLT M8 WASHER M8 X 30 HEX BOLT M8 WASHER V SPRING CLIP INSTALLED AT FACTORY SPRING CLIP INSTALLED AT FACTORY I 4MM ALLEN WRENCH KNOB WITH M8 STUD 4MM ALLEN WRENCH Part Description Qty Part No. PartKNOB WITH Description M8 STUD A Main Frame 1 PRT-52-208A B Main Frame Leg 2 PRT-52-086B L .
PAGE 4
ASSEMBLY AND INSTALLATION PARTS NEEDED NO TOOLS NEEDED A G F E I H + B 1 ASSEMBLE THE FRAME Insert vertical posts [E] into the main frame bar [A] making sure the notch in the post is at the top. Insert main frame legs [B] into the main frame [A] until the spring button pops through hole in the main frame bar. E B E B A 2 ASSEMBLE THE HOOP WARNING! Use care when assembling the fiberglass rods. Under tension they can slip out of the metal/PVC sleeves causing serious injury.
PAGE 5
ASSEMBLY AND INSTALLATION PARTS NEEDED TOOLS NEEDED L Q Q + 1/2 in. Box Wrench S + OR Adjustable Wrench K OR (2 each) 1/2 in. Socket Wrench 3 INSTALL THE CAB SKIN ONTO THE FRAME Note: Fabric skin will be tight when properly assembled. Slide the top pocket of the fabric shell [Q] over the installed hoop assembly. Pull down the lower corner of the shell and slide over the end of the side frame bars [B]. Repeat with the other elastic corner, making sure frame is secure in elastic pocket.
PAGE 6
ASSEMBLY AND INSTALLATION PARTS NEEDED TOOLS NEEDED U Q M + 1/2 in. Box Wrench S OR + Adjustable Wrench T OR (2 each) 1/2 in. Socket Wrench 6 ATTACH THE MOUNTING SYSTEM TO YOUR SNOW THROWER Note: Exact positioning may vary depending on your machine. Note: If your machine does not have a horizontal crossbar, it may be necessary to mount the 1" mounting post upper clamp pieces (U) and (T) on the vertical side frame.
PAGE 7
ASSEMBLY AND INSTALLATION PARTS NEEDED TOOLS NEEDED 1/2 in. Box Wrench OR + Adjustable Wrench OR 1/2 in. Socket Wrench ASSEMBLED CAB ON 7 INSTALL LOWER MOUNTING POSTS THE 8 ADJUSTING SNOW THROWER CAB ANGLE Once installed it may be necessary to adjust the cab to make it level. Adjust the angle of the cab until you are happy with the angle. Tighten all bolts down. CAUTION: No part of the fabric cab skin should touch the engine or exhaust system of your snow thrower. Lift up the cab and drop the .
PAGE 8
CARE AND MAINTENENCE STORAGE Store in a clean dry place. Never store a wet cab in an enclosed area as it can develop mildew. Avoid folding the plastic windows of the cab for long periods. BOLTS Check all bolts before each use to see that they are tight. If one or more bolts come loose, failure of cab parts may occur. WINDOWS Don't clean the plastic windows when they are dry—you can scratch them. Hose them with water and rub them with your bare hands. Liquid soap may be used.