Use and Care Manual

6
PARTS NEEDED
Note: Exact positioning may vary depending on your machine. Note: If your machine does not have a horizontal crossbar, it may be
necessary to mount the
1" mounting post upper clamp pieces (U) and (T) on the vertical side frame.
6
ATTACH THE MOUNTING SYSTEM TO YOUR SNOW THROWER
ASSEMBLY AND INSTALLATION

Attach 6/7" mounting posts (M) to the 1" mounting post upper
clamp (T).

Tighten until snug.

Repeat on opposite side with the remaining 6/7" mounting
post (M).
TOOLS NEEDED
1/2 in. Box
Wrench
OR
OR
1/2 in. Socket
Wrench
Adjustable
Wrench
Q

Attach the 1" mounting post upper clamp (T) to the mounting
post upper clamp top plate (U) on the horizontal crossbar of the
snow cab.

Install it so that it is snug but not tight.

Repeat on opposite side of the crossbar with the remaining
1" mounting post matching the angle with the previously
installed post.
T
U
U
T
T
U
T
Q
Q
U
S
S
M
T
Q
M
T
+
M
T
U
S
Q
+
(2 each)