Indoor Fireplace User Manual

SECTION 1: BEGINNING
E-2
QUICK START GUIDE
1) Prior to first use verify that the circuit breakers are
on.
2) The heating element on this unit may emit a slight,
harmless odor when first used. This odor is a
normal reaction to heating the internal heater parts
for the first time. This odor will dissapate and should
not happen again.
IMPORTANT SAVE THESE INSTRUCTIONS
3) If your heater does not emit heat, verify the wall
thermostat (not included) is set above the current
room temperature. If this does not work, switch the
main Power Button off for 5 minutes and try again.
4) The information regarding the model number and
other specifics about this electric fireplace can be
found under the emberbed in the lightbulb area.
Follow the direction for changing the lightbulbs to
access this area (Page 5).
IMPORTANT - INSTRUCTIONS - WARNINGS
1) read all instructions before using this fireplace.
2) This fireplace can become hot when in use.
To avoid burns do not allow bare skin to come in
contact the hot surfaces. The trim around the heater
opening becomes hot during operation. Keep
combustible materials, such as furniture, pillows,
bedding, papers, clothes, and curtains at least 3
feet (.9m) from the front of the unit.
3) Extreme caution is necessary when any heater is
used by or near children or invalids and whenever
the fireplace is left operating and unattended.
4) Do not operate any fireplace if the heater has
malfuntioned, or if the fireplace has been dropped or
damaged in any manner.
5) Do not use outdoors.
6) This firplace is not intended for use in bathrooms,
laundry areas and similar locations.
7) Do not insert or allow foreign objects to enter any
ventilation or exhaust opening as this may cause an
electric shock or fire, or damage to the heater.
8) To prevent a possible fire, do not block air intakes
or exhaust in any manner.
9) All electric heaters have hot and arcing or
sparking parts inside. Do not use this appliance in
areas where gasoline, paint or flammable liquids
are stored or anywhere the unit will be exposed to
flammable liquids.
10) Do not modify this fireplace, use it only as
decribed in this manual. Any other use not
recomended by the manufacturer may cause fire,
electric shock or injury to persons.
11) Do not burn wood or other materials in this
fireplace.
12) Do not strike fireplace glass
13) Always use a certified electricion for installation.
14) Disconnect all power coming to the fireplace at
the main service panel before performing any
cleaning, or maintenence.
15) When transporting or storing the fireplace, keep
in a dry place, free from excessive vibration and
store as to avoid damage.
The following instructions and precautions should be followed when using this or any heating
appliance to reduce the risk of fire, electric shock, and injury to persons.