Indoor Fireplace User Manual

Figure 3
E-5
SECTION 4: OPERATION
TO ACCESS CONTROL PANEL- Open the front glass
doors, then slide the mesh curtains to the sides. Lift the
hinged door that covers the control panel (figure 3).
MAIN POWER- The MAIN POWER button supplies
power to all of the functions of the fireplace. This
button must be in the ON position for any of the
functions to work including the remote.
HEATER- The Heater button supplies power to the
heater and blower. If a wall thermostat (not included)
is installed, the MAIN POWER button must be ON,
then the temperature can be controlled by the wall
thermostat.
FLAME- Each time the FLAME button is pressed, the
intensity of the flame decreases. There are five
brightness levels you can cycle through including the
OFF setting. This function can also be controled with
the remote control.
DOWNLIGHT- The DOWNLIGHT button switch turns
on the downlights that illuminate inside the firebox.
This function can also be controlled with the
remote control.
REMOTE CONTROL FUNCTIONS
CONTROL PANEL FUNCTIONS
CONTROL PANEL
MAIN POWER
HEATER
FLAME
DOWNLIGHT
ON
OFF
OFF
ON / OFF
ON
OFF
Figure 4
Figure 5
THE REMOTE CONTROL FEATURES WORK SEAMLESSLY
WITH THE CONTROL PANEL FEATURES.
DOWNLIGHT- The DOWNLIGHT button turns the
downlights on and off that illuminate inside the
firebox.
FLAME- Each time the FLAME button is pressed, the
intensity of the flame decreases. There are five
brightness levels you can cycle through including the
OFF setting.
The remote transmitter must be aimed towards the
front of the fireplace. If the remote transmitter is not
working, please replace the batteries with new ones.
FLAME
DOWNLIGHT