Indoor Fireplace User Manual

SECTION 6: DOWN LIGHT
This fireplace uses 1 frosted 120V, 7 watt, E12 socket
base bulb (open, small base, night light type).
1) Follow steps 1 through 3 in the above section
2) Locate the down light diffuser on the inside ceiling
of the firebox (Figure 9).
3) Remove the screws securing the down light
diffuser (Figure 10).
There are 2 screws in the 33EB304GRS
and 3 screws in the 39EB364GRS and 45EB424GRS.
4) Set the screws and the diffuser in a safe place as
the diffuser needs to be reinstalled after changing
the light bulb.
5) Unhook the light bulb spring clip from the bulb
(Figure 8), then unscrew and discard the bulb.
6) Replace with the proper bulb listed above.
7) After replacing the bulb make sure to replace the
spring clip. Then reinstall the downlight diffuser
with the included screws.
DOWN LIGHT DIFFUSER
Figure 9
E-7
Figure 10