Operation Manual

Listening to the Radio

1. Turn the function selector switch (5) to the TUNER position.

2. Select the desired frequency band using the band selection switch (6).

Medium wave = AM (mono) VHF = FM VHF Stereo = FM ST

3. Tune in the desired station with the station adjustment knob TUNING (10).

4. The STEREO control lamp in the display (9) only lights up if you have selected

FM stereo and are receiving the station in stereo quality.

If reception is too weak and the station received crackles, it may be that this

light will not come on. Try to improve reception by turning and bending or

twisting and altering the length of the antenna (25).

5. An aerial is integrated into the device for the reception of AM stations. The

machine can be aligned to the station by turning it. In this frequency band

programs are transmitted in ”mono“ only.

Cassette Operation

Playing Cassettes

1. Select the function OFF/TAPE (5).

2. Open the flap (18).

3. Press the  / Stop/Eject button (20) in order to open the cassette compart-

ment (17).

4. Push a recorded audio cassette, with the tape downwards and the listening side

facing forwards, into the compartment. Close the cassette compartment.

5. Press the  playback key (23) to listen to the tape.

6. With the  / stop/eject key (20) you can stop playback.

7. Wind the tape forwards or backwards if necessary in the direction of the arrow

keys.  = forwards (21),  = reverse (22). Always press the  / stop/eject

key (20) when changing the direction or stopping the tape. This prevents dama-

ge to the machine and the tape.

8. If the  / stop/eject button (20) is pressed again the flap of the cassette com-

partment opens.

9. In order to interrupt playback briefly, press the II PAUSE button (19). Pressing

again continues playback.

Recording Cassettes

1. Insert an audiocassette with the side on which you wish to record facing for-

wards. Ensure that the cassette is not copy-protected (the copy protection tab

on the top narrow side of the cassette must not have been removed).

2. Select the source from which you wish to record with the function switch (5) and

then start playback from this source if necessary. The sound source which you

are listening to is the one from which the recording is made. The recording level

is controlled automatically. Any changes to the sound and volume do not affect

the recording.

5....-05-MC 1023 19.08.2004 12:15 Uhr Seite 47