Operation Manual

 STOP (14/B): The CD is stopped.

REPEAT (16/F): Press once = he current track is repeated continuously

(REPEAT appears in the display).

Press a second time = the whole CD is played

continuously (REPEAT ALL appears in the display).

Press a third time: the function is deactivated.

MUTE (C): This is used to switch off the sound. In order to hear

sound again, press the MUTE button a second time.

Programmed Play

This can be used to program any desired sequence of tracks.

1. Press the  STOP key.

2. Press the MEMORY key (15/G). The number „00“ (storage location) and the

symbol MEMORY flash in the display. Use the I I buttons to select the

desired track and then press the MEMORY button again. Repeat the procedure

until all the desired tracks are selected.

3. Press the  / II PLAY/PAUSE button. The playback starts. The MEMORY

display flashes and the  PLAY symbol is shown in the display. Press this

button to pause briefly the playback (see the section on PLAY/PAUSE).

4. Press once the  STOP key to stop the playback while retaining the program.

5. To play the programme again, please first press the MEMORY button and then

the  / II PLAY/PAUSE key.

6. In order to delete the programme (in STOP mode), first press the MEMORY

button and then the  STOP button. The MEMORY display goes off.

The device stops automatically once the entire sequence of programmed tracks is

completed. The programme is also deleted if you change to another mode, e.g.

TUNER, remove the CD from the CD compartment or switch the machine off.

It is also possible to combine the programmed tracks with the REPEAT function.

After you have programmed and started the device, please press the REPEAT but-

ton (16/F) up to three times and then you can use the functions as described under

„REPEAT“.

5....-05-MC 1023 19.08.2004 12:15 Uhr Seite 49