User guide
DM-14B & DM-14C User’s Guide
63
Figure 1: Selection of the type of
Autoscan in the Configuration menu
FAST & ADVANCED AUTOSCAN FUNCTION (AUTOMATIC TV SEARCH)
The Autoscan function is required to carry out the automatic scan of a channel plan, to search for Analog, Digital COFDM and QAM (if the optional board is fitted) TV
channels and to automatically store them in a memory plan.
You can chose two types of autoscan modes: Fast and Advanced.
• FAST: when this is set, the meter carries out a search by storing in the selected memory plan, the analog and digital TV channels whose Level/Power is above the
selected threshold. Considering that all digital muxes are COFDM, no QAM/COFDM discrimination is made.
• ADVANCED: when this is set, the meter, after completing the search for analog and digital TV channels, identifies the COFDM from the QAM muxes and selects and
memorises the main parameters necessary to lock onto the digital packages. Once this procedure is completed, the channels are stored in the plan that was previously
selected.
SELECTION OF THE TYPE OF AUTOSCAN:
To select FAST or ADVANCED autoscan, enter in CONFIG. by keeping the key pressed for two seconds and rotating the encoder
Select Autoscan, press with the encoder select FAST or ADVANCED and quit by pressing