User guide
DM-14B & DM-14C User’s Guide
64
HOW TO ACTIVATE THE FUNCTION:
To start scanning select, using the encoder “Auto Scan TV”, set the Destination plan (DESTIN.) and the threshold level (LEV/POW), as shown below:
Set the configuration parameters in the AUTOSCAN MENU selection table:
• SOURCE: the channel plan, which is active in the meter, is automatically shown.
• DESTIN.: select the Plan where to save the Auto Scan.
• LEV/POW.: allows you to select the threshold value, which must be near to the levels you expect to achieve. If you select a value that is too low (for example 30dBuV
with a 90 dBuV reception level), saturations may be generated, which can cause errors in the program search.
Press SAVE? or OVERWRITE? To confirm and start scanning.
N:B.:
• If the destination plan is not used, the word SCAN? appears, if however the destination plan is used, the word OVERWRITE? will appear. The previously saved plan will be
cancelled and overwritten if this option is selected.
Figure 2: Scan example