User guide

DM-14B & DM-14C User’s Guide
92
7.2.2 HOW TO MODIFY A MEMORY PLAN
HOW TO MODIFY AN EXISTING PROGRAM
a) Select and open the Memory file you want to edit,
b) Click twice on the line relative to the program you want to edit,
c) The program opens a window where you can modify all the parameters of the chosen program (see fig. 7.1)
HOW TO ADD A PROGRAM
a) Using the right-hand key on your mouse, click on the line you want to modify and select “Add”,
b) Carry out the settings of the new program in the window that opens (see fig. 7.1),
c) Press “Ok” to confirm the addition of a program.
7.2.3 HOW TO TRANSFER A MEMORY PLAN FROM A PC TO AN INSTRUMENT
a) Once you have carried out the modification, following the procedure described in paragraph 7.2.2, click on the
“Instrument-PC” key in the MEM. PLAN properties section (on the right of the screen) to transfer a memory plan from
a PC to your instrument,
b) The memory plan will load in the instrument.
7.2.4 HOW TO PRINT A MEMORY PLAN
a) Select and open the Memory file you want to print (See 7.2.1),
b) Click on “Instrument” on the instrument bar and select “Print”,
c) Configure the print settings and press “OK” to confirm.
7.2.5 HOW TO SAVE A MEMORY PLAN
a) Open a Memory Plan file (See 7.2.1),
b) Click on “File” on the instrument bar and select “save As”,
c) Chose a location where you want to save the file, give it a name and press “Save”.
7.2.6 HOW TO DELETE A MEMORY PLAN
a) Select and open the Mem. Plan file you want to delete,
b) Press the “Delete” key in the “Instrument File Manager” window,
c) The file will also be deleted from the instrument.
7.3 NOTES
a) None
7.4 WARNINGS
a) When new memory plans are inserted, cancelled or modified and transferred to the instrument, we suggest you carry out a Defrag in
your meter. (Please refer to the instrument’s user guide)
b) If this operation continues to fail, contact Ro.Ve.R Laboratories SpA (
[e-mail]).