User guide

DM-14B & DM-14C User’s Guide
94
8.2.2 HOW TO CHANGE A CHANNEL PLAN
HOW TO CHANGE AN EXISTING CHANNEL
a) Select and open the Channel file you want to edit,
b) Click twice on the line relative to the channel you want to edit,
c) The program opens a window where it is possible to modify all the parameters.
HOW TO ADD A CHANNEL
a) Using the right-hand key on the mouse, click on the line to be modified and select “Add”,
b) A window will open where it is possible to set the new channel’s parameters (See fig. 8.1),
c) Press “Ok” to confirm the addition of a new channel.
8.2.3 HOW TO TRANSFER A CHANNEL PLAN FROM A PC TO YOUR INSTRUMENT
a) Once the modification has finished, following the procedure described in paragraph 8.2.2) click on the “Instrument –
PC” key in the CH. PLAN properties section (to the right of the screen) to transfer the channel plan from the PC to your
instrument,
b) The channel plan will be loaded in your instrument.
8.2.4 HOW TO PRINT A CHANNEL PLAN
a) Select and open the Channel file you want to print, (See 8.2.1)
b) Click on the word “Instrument” on the instrument bar and select “Print”,
c) Configure the print settings and press “OK”
8.2.5 HOW TO SAVE A CHANNEL PLAN
a) Open a Memory Plan file (See 8.2.1),
b) Click on “File” on the instrument bar and select “save As”,
c) Chose a location where you want to save the file, give it a name and press “Save”.
8.2.6 HOW TO DELETE A CHANNEL PLAN
a) Open a plan folder (see fig. 4.1)
b) Select and open the Ch. Plan you want to delete,
c) Press the “Delete” key in the “Instrument File Manager” window,
d) The file will also be cancelled in the instrument.
8.3 NOTES
a) None.
8.4 WARNINGS
a) We strongly suggest NOT to cancel the existing channel plans because the channel plans generated based on the
eliminated ones may be distorted.
b) If this operation continues to fail, contact Ro.Ve.R Laboratories SpA (
[e-mail]).