A50E Expandable Amplified Handset Installation Guide & User Manual The ClearSounds A50E is an expandable amplified handset for use with ClearSounds A50 Amplified Cordless Expandable Telephone System from ClearSounds Communications v407
Thank you for selecting the A50E Expandable Amplified Handset from ClearSounds Communications. This manual is designed to familiarize you with the A50E Expandable Handset setup, registration and basic functions. For detailed operational instructions, please refer to the ClearSounds A50 User Manual. Keep this manual for future reference. Please save your sales receipt as proof of purchase in the event you need warranty service. Please visit our web site at www.clearsounds.
9. Never push objects of any kind into this product through casing slots as they may touch dangerous voltage points or short out parts that could result in a risk of fire or electric shock. 10. Never spill liquid of any kind on the product. 11. Do not overload wall outlets and extension cords as this can result in the risk of fire or electric shock. 12. Avoid using telephone (other than a cordless type) during an electrical storm. There may be a remote risk of electrical shock from lightening. 13.
IMPORTANT! Only use AAA NiMH rechargeable batteries. DO NOT USE REGULAR ALKALINE OR CARBON BATTERIES! Handset Battery Charging Handset batteries MUST be connected before beginning initial charging! 1. Place the handset into the charger. The charge indicator LED on the charger will light RED. 2. IMPORTANT: The batteries in the handset must be fully charged for 24 hours before using the telephone for the first time. 3.
Addendum A50 HANDSET REGISTRATION 1 Begin with handsets fully charged for 24 hours. Remove all handsets from the charging bases, bringing all of them to the main base and setting them on the counter right next to the main charging base. (The handsets cannot be registered while they are in the charging base). Get ready for this 2-handed process. 2 Put your one finger on the PAGE button on the main base.
Handset Registration With Your ClearSounds A50 The following steps are for registration of additional handsets (model A50E): 1. Make sure the ClearSounds A50 base unit is connected into the AC outlet and phone jack. Your ClearSounds A50 handset will show HS-1 (Handset 1) on the LCD. 2. Press and hold the /PAGE button on the base unit. After 3 seconds, press the “CH” button on the handset until you get a beep and the display will read HS-2. 3.
Maintenance Taking Care Of Your Telephone Your cordless telephone contains sophisticated electronic parts, so it must be treated with care. Avoid Rough Treatment Place the handset down gently. Save the original packing material to protect your telephone if you ever need to ship it. Avoid Water Your telephone can be damaged if it gets wet. Do not use the handset outdoors in the rain, or handle it with wet hands. Do not install your charger near a sink, bathtub, shower or pool.
FCC Registration Notice THE INFORMATION INFORMING THE USER OF HIS/HER AND THE TELEPHONE COMPANY’S RIGHT AND OBLIGATION IS OUTLINED BELOW. a) This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. ON the bottom of this equipment is a label that contains, among other information, a product identifier in the format US: AAAEQ##TXXXX. If requested, this number must be provided to the telephone company.
utility commission, public service commission or corporation for information. NOTICE: If your home has specially wired alarm equipment connected to the telephone line, ensure the installation of the ClearSounds A50 does not disable your alarm equipment. If you have questions about what will disable alarm equipment, consult your telephone company or a qualified installer. k) This equipment is hearing aid compatible.