Quick Start Guide

ManualsBrandsClick Decor ManualsFurniture & DecorClick Decor - Traditional Wood 1-Drawer Night Stand - White

NOT Supplied

Things You Need To Know

Guidelines

FAILURE TO FOLLOW THESE WARNINGS

WHEN IN USE COULD RESULT IN INJURY

Two people are required to assemble this item

DON’T

WARNING:DO NOT LET

CHILDREN PLAY IN OR

AROUND THE UNIT DUE

TO THE POSSIBLE RISK

OF INJURY.

We suggest you spend a short time reading through the leaflet before

you start

When you are ready to start, make sure that you have the right tools,

plenty of space and a clean, dry area for assembly.

Unwrap all packing materials and place the components on a clean

surface to protect them from damage. We recommend using the

product packaging to protect your floor during assembly.

Carefully check that you have all the parts before beginning assembly.

Due to the size of this product, we recommend assembly in the room

intended for use.

Make sure the product is fully assembled as illustrated and that all

connections are fully tightened before use.

Wipe occasionally with a soft, damp cloth then buff dry with a soft clean

dry cloth.

The wood will mellow and change color over time. As a result, we

recommend that ornaments and items placed on the surface are moved

regularly for the first few months to prevent an uneven mellowing.

Check all bolts and screws every 90 days. As necessary tighten if any

are loose.

Keep small parts and pieces away from children and pets until fully

assembled.

Do not drag or pull your furniture.

Do not rub or scrub the surface when cleaning.

Do not use silicone based furniture polish. Silicone in furniture

polishes can break down the finish.

Never allow any kind of liquid to remain on your furniture. Absorption

can cause wood to warp or finishes to de-laminate.

Do not place hot items (e.g. hot drinks) directly on to the wood

surface. Please make sure you use a placement or coaster.

Do not stand on the item or use as a step ladder.

Number of people required to assemble

Time to assemble

40 Min.

Summary of content (21 pages)

PAGE 1
Things You Need To Know Number of people required to assemble Two people are required to assemble this item Time to assemble 40 Min. NOT Supplied Guidelines FAILURE TO FOLLOW THESE WARNINGS WHEN IN USE COULD RESULT IN INJURY DO DON’T We suggest you spend a short time reading through the leaflet before you start Do not drag or pull your furniture. When you are ready to start, make sure that you have the right tools, plenty of space and a clean, dry area for assembly.
PAGE 2
Side Table Product Dimension Actual product size 24.02” Height x 19.89” Width x 18.7” Depth To speak to a customer servicerepresentative, please call toll free: 1-855-372-2315 U.S. 6am - 5pm PST, 0-800-051-6775 U.K.
PAGE 3
Side Table Getting To Know Your Product 3 2 5 8 1 9 10 11 15 4 10 6 16 11 7 14 13 12 3
PAGE 4
Side Table Things You Need To Know Components supplied. Please use this guide if you require replacement parts.
PAGE 5
Side Table Things You Need To Know Components supplied. Please use this guide if you require replacement parts.
PAGE 6
Side Table Things You Need To Know Components supplied. Please use this guide if you require replacement parts. Fixtures and fittings supplied (not to scale) 6 (A) Small Cam Lock for Drawer x4 M12x10mm (B) Runner (Left + Right) CR/CL on side panel DR/DL on drawer x1set 350mm (D) Cam Bolt x28 M6x28mm (Spare x2) (E) L Bracket x4 20x20x15mm (G) Cup Handle x1 (H) Runner Screw x20 M3.
PAGE 7
Side Table Assembly Instructions 1 1. Ensure all parts have been removed from the carton and place on a protected surface or carpet. 2. Check all parts and hardware are the same as the “Parts List.” 3. Insert 28 x Cam Bolts (D) into Parts (3), (7), (6), (8), (9) & (12) and tighten with a screwdriver (not supplied). 4. Attach L Bracket (E) on to 2 x Side Rail (10) and 2 x Rail (11) and tighten with a screwdriver (not supplied).
PAGE 8
Side Table Assembly Instructions Note: Ensure below assembly Steps & Parts are following below image. 2 1. Attach Left Front Leg (7) & Left Rear Leg (9) to Left Side Panel (1) & Side Rail (10) as below image. Note: L Bracket (E) on Side Rail (10) must be in upper position as below image. 2. Insert 6 x Large Camlocks (C) into Panels (1) & (10) and tighten with a screwdriver (not supplied). 3. Attach Right Front Leg (6) & Right Rear Leg (8) to Left Side Panel (2) & Side Rail (10) as below image.
PAGE 9
Side Table Assembly Instructions 3 Note: Ensure below assembly Steps & Parts are following below image. 1. Attach Runner (B)/CL to Left Side Panel (1) with 3 x Small Screws (H) and tighten with a screwdriver (not supplied). Note: A. Please follow the CL mark on Runner (B)/CL to attach to Left Panel (1) as below image. B. Align Runner (B) with the join line on the board. Fix Screw (H) to the second assembly hole of Runner (B)/CL on side panel. 2.
PAGE 10
Side Table Assembly Instructions 1. Attach Back Panels (5) & 2 x Rails (11) to assembled Left Panel as below image. Note: L Bracket (E) on Rail (11) must be in upper position as below image. 4 2. Insert 4 x Large Cam Locks (C) into Panel (5) & 2 x Rails (11). Tighten with a screwdriver (not supplied).
PAGE 11
Side Table Assembly Instructions 5 1. Attach assembled Right Side Panel (2) to assembled unit as below image. 2. Insert 4 x Large Cam Locks (C) into Back Panels (5) & 2 x Rail (11). Tighten with a screwdriver.
PAGE 12
Side Table Assembly Instructions 6 1. Attach Shelf (4) with assembly hole side down to assembled unit and fasten with 4 x Screw (H) as below image. Tighten with a screwdriver. 2. Attach 4 x Foot Pad (K) on the end of each foot.
PAGE 13
Side Table Assembly Instructions 7 1. Attach Top Panel (3) to assembled unit as below image. 2. Insert 4 x Large Cam Locks (C) into Side Panel (1) & (2) and tighten with a screwdriver.
PAGE 14
Side Table Assembly Instructions 8 1. Attach Drawer Left Side Panel (13) & Right Side Panel (14) to Drawer Back Panel (15) with 4 x screws (I) and tighten with a screwdriver.
PAGE 15
Side Table Assembly Instructions 9 1. Slide Drawer Bottom Panel (16) into the groove of assembled drawer unit.
PAGE 16
Side Table Assembly Instructions 10 1. Attach Front Drawer Panel (12) to assembled drawer unit. 2. Insert 4 x Small Cam Locks (A) into Panels (13) & (14) and tighten with a screwdriver.
PAGE 17
Side Table Assembly Instructions 11 1. Attach Cup Handle (G) to assembled unit with 2 x Screws (K) & Flat Washer (F) as below image. Tighten with a screwdriver.
PAGE 18
Side Table Assembly Instructions 12 1. Attach Runner (B)/DR & DL to assembled drawer unit with 6 x Screws (H) as below image. Tighten with a screwdriver.
PAGE 19
Side Table Assembly Instructions 13 1. Insert the assembled drawer into the unit as below image.
PAGE 20
Side Table Assembly Instructions 14 Periodically (every 90 days) make sure that all screws are still fully tightened. ATTENTION: Be certain that all screws are fully tightened before using this product.
PAGE 21
Limited Warranty The product you have purchased is warranted against defects in material and workmanship while owned by the "Original Purchaser." The term "Original Purchaser" is defined as the party or entity that purchases these products from and authorized dealer or retailer as shown by the original sales receipt. The warranty does not apply to "as is" or previously owned products.