Quick Start Guide

Side Table

Assembly Instructions

Note: Ensure below assembly Steps & Parts are following below image.

1. Attach Runner (B)/CL to Left Side Panel (1) with 3 x Small Screws (H) and tighten

with a screwdriver (not supplied).

Note:

A. Please follow the CL mark on Runner (B)/CL to attach to Left Panel (1) as below

image.

B. Align Runner (B) with the join line on the board. Fix Screw (H) to the second

assembly hole of Runner (B)/CL on side panel.

2. Attach Runner (B)/CR to Right Side Panel (2) with 3 x Small Screws (H) and

tighten with a screwdriver (not supplied).

Note:

A. Please follow the CR mark on Runner (B)/CR as below image.

B. Align Runner (B) with the join line on the board. Fix Screw (H) to the second

assembly hole of Runner (B)/CR on side panel.

x 6

x 1