User Guide

Auto mat ic mal func tion by pass with AutoRe Moni tor ing™

To provide protection even if a component malfunctions, the system automatically bypass

any faulty point and arm all other triggers and sensors to provide the utmost possible

protection until you can have the system serviced by your local Authorised Clifford

Dealer. If you accidentally armed with the bonnet, boot or a door open, just close the

open point (no need to disarm-and-rearm) and the system will again monitor that point.

Multiple- event To tal Re call™

The system’s memory records the identity of the last eight activated or malfunctioning

triggers and sensors, which allows your installer to instantly track down malfunctions. To

identify the triggers and sensors held in the system’s memory, use the following procedure:

1. Remotely arm and disarm while pressing and holding the unmarked button on the

PlainView 2 switch.

2. The LED will flash 1-10 times to indicate the most recently activated point, pause,

flash 1-10 times to indicate the second most recently activated point, and so on.

3. Write down the number of flashes between pauses and refer to the chart on the

previous page.

Smart prior in tru sion at tempt alert

If you hear three chirps when you disarm with the remote control, it means that a trigger

or sensor was activated in your absence. When you enter the vehicle and turn on the

ignition (or start the engine), the LED will flash 1-10 times, pause, then repeat the flash

cycle 4 more times. Count the number of flashes in one cycle and refer to the chart on

the previous page.

Op tional Cliff Net Wiz ard™ & Da ta Port

If you opted to have the Clifford DataPort interface connector installed with your

Concept 300, you can use our CliffNet Wizard software to access your system through

your PC (Microsoft Windows™ required). Doing so provides a wealth of benefits:

n Point-and-Click Feature Programming — Programming the system’s many features

is easy with the PlainView 2 Switch. But setting and selecting features via the optional

CliffNet Wizard is a true joy. The intuitive graphical user interface of CliffNet Wizard

will actually show you, on your PC screen, the on/off and other settings of each user-

programmable feature. You can change settings simply by mouse-clicking the graphical

button for each feature. Now you can customise features, add or delete remote

controls, change remote control button assignments, set timers, view a chronological

history of trigger and sensor activations, and much more whilst actually having fun!

n SecureAccess™ — What if a clever thief tries using his laptop to control your system?

We know that could happen. That’s why we doubly protect access to the system. In

order to “connect” with the control unit, the system must first be disarmed with your

remote control and you must enter your secret valet code.

If you are interested in learning more about these capabilities and enhancements to your

Concept 300, you’ll find extensive details at our Internet Website at

www.clifford.com/wizard. If you already have this option, please refer to the CliffNet

Wizard manual and/or online help for specific operating instructions (you may also

download any enhancements or revisions to CliffNet Wizard from our website at