User Guide

Timer op tions
The system’s built-in electronic timer can be optionally wired to provide one of several
different functions. Ask your Authorised Clifford Dealer for further details:
Re mote con trolled timed head light activation option
The system’s built-in timer can be wired through an optional relay to provide remote
controlled headlight activation for any duration you wish between 1 second and 4 minutes,
allowing you to remotely light your way to and from the vehicle by pressing the
button on your remote control.
Auto mat ic re mote win dow clo sure op tion
The timer can be wired with an optional relay to automatically close the windows upon
remote arming on vehicles with a feature that closes them if the key is held in the
driver's door (this is a feature on several European cars). These cars have a special circuit
to detect when each window is fully closed and cuts power to that motor.
If your vehicle does not have this feature, Clifford’s Window RollUp Module is needed.
One module can control two power windows.
We also offer a more advanced SmartWindows 4 module that does the same thing, but
also allows you to remotely roll down the windows after disarming and remotely vent
them open slightly for ventilation on hot days. Inside the car, SmartWindows 4 also
provides one-touch full open, one-touch full close and one-touch stop to each of your
factory window control switches.
Auto matic Win dow Rol lUp In stant By pass
If you have the automatic window closure option, you may arm without automatically
closing the windows. This is handy on hot days by allowing you to leave one or more
windows slightly open for ventilation whilst the system remains armed.
To do so, simply turn the ignition switch to “ON” and then “OFF” rapidly. You will hear
a chirp confirmation (this action also activates Instant AutoArming Bypass noted on page
10). When you then exit and arm, the system will not close the windows. Normal
operation is restored the next time you arm.
Smart Powe rUp™ 2
If power to your Concept 300 system is ever removed, the SmartPowerUp 2 feature
automatically restores the system’s previous state when power is restored.
So if a thief tampers with the power, the system instantly re-arms and sounds the siren
(your vehicle will remain immobilized even without power). For vehicle servicing, just
put the system in valet mode. If your mechanic must interrupt power, the system will
automatically return to valet mode when power is restored; there will be no alarm
activation.
16