User Guide

Ta ble of User- Selectable Fea tures
Feature Select
1 unmarked press 2 unmarked presses 3 unmarked presses 4 unmarked presses
1 ✱ press
Add new remote
NOTE 1
Chirps: off/loud/quiet
(1/2/3 chirps)
AutoArming: off/on
NOTE 4 — Other vehicle’s remote:
arm/disarm (1 then 2 chirps)
2 ✱ presses
NOT USED NOT USED
Lock upon AutoArming: off/on
NOTE 5 — Other vehicle’s remote:
boot release* (2 chirps)
3 ✱ presses
NOT USED
Remote valet mode via
buttons and
✱: off/on
NOT USED
NOTE 5 — Other vehicle’s remote:
silent arm and disarm (3 chirps)
4 ✱ presses
NOT USED
AutoStart**: both off/both on/temp
only/battery only (1/2/3/4 chirps)
FACT: off/on
NOTE 5 — Other vehicle’s remote:
remote engine starting** (4 chirps)
5 ✱ presses
AutoLock: off/on
NOT USED NOT USED
NOTE 5 — Other vehicle’s remote:
timed headlight activation* (5 chirps)
6 ✱ presses
AutoUnLock: off/on
Clear all remotes
NOTE 2
NOT USED
NOTE 5 — Other vehicle’s remote:
window rolldown/venting* (6 chirps)
7 ✱ presses
Reset all features (except remotes
and valet code) to factory settings
Set a new secret
valet code NOTE 3
NOT USED
NOTE 5 — Other vehicle’s remote:
remote valet mode (7 chirps)
* Re quires an op tional ac ces sory: ask your Author ised Clif ford Dealer about this fea ture.
** Re quires the op tional Clif ford In tel liS tart 4 ac ces sory not evaluated by Thatcham.
NOTE 1:Press the button of the new remote. You’ll hear one chirp. Press button
again. You’ll hear two chirps to confirm the new remote control has been added.
NOTE 2:You’ll hear two chirps to indicate all remotes have been cleared from memory.
You must now add new/existing remotes with the “Add new remote” feature (column 1,
row 1).
NOTE 3:Immediately press the unmarked button, enter your new code, wait for the two
chirps, then turn off the ignition (you’ll hear 3 chirps to confirm program mode exit). You
MUST now turn the ignition back on and then re-enter your new code. If the LED flashes
on, your new code has been accepted. If the LED does not light, the two codes did not
match and the system has reverted to your previous code.
NOTE 4:This allows you to arm/disarm your system with an unused button or button
combination on the remote control of a Concept 100, 300, 400 or 600 system on your other
vehicle(s). For instance, to set button ✱ of the other car’s remote control to arm and disarm
your Concept 300, select column 4, row 1, then press button ✱ (you’ll hear one chirp).
Immediately press button ✱ a second time (you’ll hear a 2-chirp confirmation). Button ✱
of the other vehicle’s remote will now arm/disarm your Concept 300 on this car.
NOTE 5:The features in this column allow you to control your Concept 300 with the ACG
2 remote control of a Clifford system on your other vehicle(s). Just select the function you
wish, then transmit the unused button or button combination on the other remote that you
want to use to perform that function (you will then hear the chirps noted). Please note that you
must first set a button or button combination on the remote that will arm/disarm the system
(column 4, row 1) before these others will be accepted.