User Guide

TO AC TI VATE THE
TIMED HEAD LIGHTS,
PRESS:
If you have the remote timed headlight activation option, pressing
the button will turn on the headlights for any duration you
wish between one second and 4 minutes (the factory setting is 10
seconds; see User-selectable features on pages 18-19). If you do not
have this option, you may assign this button to activate one of the
other functions noted in column 4 of the Ta ble of User- Selectable
Fea tures on page 19, or it can be programmed into a Clifford ACG
2 electric garage door/entry gate opener interface or a Concept
100, 300, 400 or 600 on your other vehicle.
TO RE MOTELY START
THE ENGINE, PRESS:
✱
The ✱ button is factory-set to activate the IntelliStart 4* remote
engine starting accessory. If you do not have this option, you may
assign this button to activate one of the other functions noted in
column 4 of the Ta ble of User- Selectable Fea tures on page 19, or it
can be programmed into a Clifford ACG 2 electric garage
door/entry gate opener interface or a Concept 100, 300, 400 or
600 on your other vehicle.
TO ARM OR DIS ARM
SI LENTLY, PRESS:
AND ✱
By simultaneously pressing both the button and the ✱
button, you can arm or disarm with all the indications previously
noted except the chirp acknowledgments. Silent arming and
disarming is handy when parking late at night in a quiet
residential area.
TO RE MOTELY
EN ABLE OR EXIT
VALET MODE, PRESS:
AND ✱
By simultaneously pressing both the button and the ✱
button, you can enable or exit your Concept 300’s valet mode (see
page 11 for details on valet mode). Two indicator light flashes
confirm remote enabled valet mode entry, a single flash confirms
valet mode exit. If you prefer, you may turn off remote controlled
valet mode as noted in the User-selectable features section on pages
18-19 so that the system cannot be placed in valet mode via the
remote control.
TO RE MOTELY
VENT OR OPEN THE
WIN DOWS, PRESS:
AND
If you have the SmartWindows 4 option, simultaneously pressing
both the and button will fully open the power windows
if the system is disarmed. If the system is in its armed state when
you press this button combination, SmartWindows 4 will vent the
windows slightly for ventilation on hot days. Please note that a
SmartWindows 4 module will control two power windows,
additional modules may be added to control additional windows.
SmartWindows 4 is not compatible with some vehicles.
TO OVER RIDE THE
PROX IM ITY
SEN SOR, PRESS:
AND
Pressing buttons and within 10 seconds of arming will
override your Concept 300 system’s Proximity Sensor III.
Confirmation of this remote controlled sensor override is
acknowledged with 4 flashes of the indicator lights (see Re mote
con trolled over ride of the Prox im ity Sen sor III on page 13).
6
* This fea ture/ac ces sory is not evalu ated by Thatcham.
REV B UPDATE PAGE: ONLY PAGES 6, 7, 12 and
the back cover change, all other pages same as REV A.