Standard Features The following are standard features of this system. Some vehicles may require optional parts/wiring and a few are incompatible with some features.
Welcome to the world of high-technology vehicle security and convenience C ongratulations on the purchase of your Clifford Electronics mobile security/convenience system. Clifford Electronics has long been recognized as the leading manufacturer of high-technology vehicle security systems. Our commitment to technological innovation, quality and reliability is clearly evident in your Clifford system.
Adding new remote controls For other drivers, or to control Clifford G4 systems on your other cars with the same remote, you can buy additional remote controls from any Clifford Dealer (or direct from the Customer Service Department of your nearest Clifford Headquarters listed on the front cover) and program them into the system yourself. ACE 4000 will respond to as many as four remote controls. NOTE: Clifford G4 systems will respond only to G4-type ACG 2 re mote con trols.
PlainView 2 Coded Valet Mode All car alarms have a valet mode that turn off the security features. This mode is often used to turn off the alarm if the system is not responding to the remote. However, thieves can disable other alarm brands by simply hotwiring the ignition and flicking the alarm’s easy-to-find “hidden” valet switch. In contrast, your ACE 4000 system has safeguards that ensure a thief cannot enable the valet mode as a way of “turning off” your system.
Dual-Zone Piezo Sensor & Glass Tampering Sensor The Dual-Zone Piezo Sensor detects theft-related vibrations/ impacts and triggers the alarm. It also has a secondary warning zone that can detect less serious occurrences — such as someone bumping your car with their car door — and will sound a brief warning tone. Today’s thieves shatter vehicle windows with a small metal punch device that does not create any vibrations for an impact sensor to detect.
High-Output Insignia Siren This Clifford-engineered siren is more rugged than generic sirens and has these features: n User-selectable chirp volume: You can control the volume of the arm and disarm chirps. From the factory, your system issues QuietChirps. If you prefer, you may select the full-volume LoudChirp acknowledgments. See User-selectable features. n Remote siren silencing: If triggered by a non-threatening event, you can silence the siren without remotely disarming.
Optional CliffNet Wizard™ & DataPort Interface Connector If you opted to have the Clifford DataPort interface connector installed with your system, you can use our CliffNet Wizard software to access your system through your Windows PC. CliffNet Wizard will show you, on your PC screen, all your user-programmable feature settings. You can change settings simply by mouse-clicking the graphical button for each feature.
Reset All Features If you wish to reset all the user-selectable features to their normal factory presets, you can do so simply by choosing the Reset all features selection (column 1, row 7) on the Table of User-Selectable Features. If you do so, all features — except the programmed remote controls and your valet code — will be reset to the factory settings that are indicated in BOLD type on the Table of User-Selectable Features.