Home Security System User Manual

2004 Directed Electronics, Inc.

If your remote transmitter is lost or damaged, you can manually

override the starter kill. To do this, you must have the vehicle's

ignition key and know where the Valet

switch is located. Be sure

to check with the installer for the location of the Valet

switch.

To override the starter kill, turn

the ignition on and press the

Valet

switch within 10 seconds.

The status LED will stop flashing

and the vehicle should start. If it does not start,

you may have waited too long; turn the ignition off and repeat the

process.

LOCATION OF VALET

SWITCH_____________________________

You can prevent your system from automatically activating the

Failsafe

Starter Kill and locking the doors by using Valet

Mode.

This is very useful when washing the vehicle or having it serviced.

In Valet

Mode, the starter kill cannot be activated, even with the

transmitter, but all convenience functions (door locks, remote

start, etc.) will continue to work normally.

Valet

Mode

DRW-35

Disabling the Starter Kill Without a Transmitter