Installation guide

secondary harness wire connection guide

secondary harness wiring diagram

___

secondary harness wiring guide

NNOOTTEE::

For further description of the H2/1 to H2/6 wires, please refer to the

Door

Lock Harness Wire Connection Guide

section.

h2/1 yellow/white (-) horn honk output (200mA)

This wire is a low current output (200mA) for the horn to sound when the system has

been violated.

h2/3 black/white domelight supervision input (87)

This wire determines the output of the BLACK/WHITE H1/15 wire on the main 18-pin

harness. If the vehicle has a negative domelight circuit, ground this wire; if the vehi-

cle has a positive domelight circuit, attach this wire to a 12 volt constant source.

h2/4 blue/white second unlock output (200mA)

This wire produces a (-) 200mA output for progressive locks in which the driver door

unlocks first and the remaining locks unlock with a second press of the unlock button.

EMPTY Not Used

BLUE/WHITE Second Unlock Output (200 mA)

BLACK/WHITE Domelight Supervision Input (87)

EMPTY Not Used

YELLOW/WHITE (-) Horn Honk Output (200 mA)

H2/1

H2/2

H2/3

H2/4

H2/5

H2/6