Installation guide

table of zones

When using the diagnostic functions, use the Table of Zones to see which input has

triggered the system. It is also helpful in deciding which input to use when connecting

optional sensors and switches.

NNOOTTEE::

The Warning Zone response does not report on the LED.

system features programming

This system has many features that can be programmed to accommodate the user's

personal preferences and make system installation easier. They are listed in two pro-

gramming grids on the following pages. Many features have default settings that have

been programmed at the factory and are indicated in bold type.

The User Selectable Features grid allows the user and installer to change operational

features through the PlainView 2 Valet. The Installer Selectable Features grid allows

the installer to change input/output functions of the system to integrate with the vehi-

cle’s specific characteristics.

cliffnet wizard pro installation software programming

Cliffnet Wizard Pro provides access to all available system features and some that are

not available when manually programming with the Valet switch. Cliffnet Wizard Pro

is compatible with Microsoft Windows 2000/ME/XP/NT so most programming oper-

ations can be accomplished by pointing and clicking with a mouse. This eliminates the

need for programming grids and lengthy programming sequences. For a complete

guide to system programming using the Cliffnet Wizard Pro refer to the Cliffnet

Wizard help menu.

manual programming instructions

LED Flashes Trigger type Input description

1 Data Proximity Sensor

2 N/A Not Used

3 Mux 1 Sensor Input

4 Instant Door Pin Input

5 Instant Trunk Pin Input

6 Instant Hood Pin Input

7 Instant Ignition Input

8 Mux 2 Sensor Input

9 N/A Not Used

10 N/A Alarm power reset