Installation guide

© 2006 directed electronics
26
user selectable features
* This feature is only available with optional IntelliStart connected.
** This feature is only available with optional SmartWindows connected.
user selectable features descriptions - column one
add new remote (only applicable with Radar 2 remote)
z
Auto-learn new remote controls to the system in the standard button configu-
ration. For more information, see programming note #1.
auto (passive) arm - off/on
z
Off: The transmitter must be used to arm the system.
z
On: When the system sees the ignition turn off and the last protected entry (door,
hood, or trunk) close, it will begin a 30-second countdown before arming itself.
After the first five seconds, you will hear two chirps and the lights will flash. The
system will arm 25 seconds later.
chirps - off/on/quiet
z
Off: Chirps will not sound when arming/disarming the system.
z
On: Chirps will sound when arming/disarming the system.
z
Quiet: Chirps will sound when arming/disarming the system but at a lower
volume than normal.
First
Press
Then
Press
Add new remote
(autolearn)
Set PIN code
(default = 2)
New remote learn
arm/disarm only
Auto (passive)
arm on/off
Select siren
sounds
New remote learn
accessory A channel
Chirps
on/off/quiet
FACT II on/off New remote learn
accessory B channel
Auto lock
ignition/off/rpm
Remote valet
on/off
New remote learn
silent mode
Auto unlock
ignition/off
Entry delay on/off New remote learn
remote valet
Auto (passive)
arm and lock
on/off
Reset to default
(except transmitter
and valet code)
New remote learn
remote start*
Siren duration
30/60/90
Panic on/off New remote learn
window down/vent**
Second unlock
off/on
Autostart setting*
(off/battery only/
temp only/
battery and temp)
Not Used
Not used Not Used Clear all remotes