Installation guide

© 2006 directed electronics
33
installer selectable features descriptions - column three
rpm programming
z
Programs the tachometer input for the BlackJax and door locks. For more infor-
mation, see programming note #4.
engine type petrol/diesel
z
This feature applies only if IntelliStart 4 is installed.
z
Petrol: The IntelliStart will crank the engine three seconds after the ignition is
turned on or after input on the wait-to-start wires ceases.
z
Diesel: The IntelliStart will crank the engine 20 seconds after it turns the ignition
on and will ignore the wait-to-start input wires.
NNOOTTEE::
RPM must be reprogrammed after changing this feature.
smart windows program
z
This feature applies only if SmartWindows is installed.
z
Enter this feature and then follow the programming instructions included with
SmartWindows.
horn output - pulsed/latched
z
Pulsed: H2/9 YELLOW/WHITE wire will generate a pulsing (-) output when the
alarm is in full trigger. When arming and disarming the output does not operate.
z
Latched: H2/9 YELLOW/WHITE wire will generate a constant (-) output when the
alarm is in full trigger. When arming and disarming the output will pulse as per
the standard chirp pulses.
auto immobilization - off/on
z
Off: Turns the auto immobilization feature off.
z
On: Turns the auto immobilization feature on.