Installation guide

© 2006 directed electronics
39
z
Arm the alarm and then disarm the alarm.
z
Turn the ignition on and enter the system valet/PIN code.
one-time valet feature
This feature allows the system to be put in valet mode only until the next time the
ignition is turned off.
ON: Valet mode will be exited every time the ignition is turned on.
OFF: Valet mode will only be exited by using the valet switch or the remote control
second unlock feature
OFF: H2/12 Blue/white wire will generate the programmed unlock pulse at the same
time as first unlock.
ON: System will monitor disarm channel for 10 seconds after disarm, if disarm
channel is again transmitted within 10 seconds, H2/12 Blue/white will generate
the programmed unlock output.