GP500 User's Manual

AutoArming™
If this feature is enabled and you forget to remotely arm. After 30 seconds
pass, the system is automatically armed. In instances where you want to
bypass AutoArming, such as when fueling the motorcycle, simply turn the
ignition on and then off again after you have parked.
Digi tal Dual- Zone Tilt/Mo tion Sen sor
Clifford’s Digital Tilt/Motion Sensor detects one degree of tilting or any
minute forward/reverse motion of the motorcycle while completely ignoring
all other conditions that falsely set off other sensors. Even if you park your
motorcycle on the steepest hill, it will accurately respond to the first hint of
tampering.
The Digital/Tilt Motion Sensor will first provide a five chirp warning if the
motorcycle tilts more than one degree. Once the motorcycle tilts more than
two degrees, the full alarm will sound.
TO RE MOTELY
BY PASS THE
WARN ING ZONE:
During the first 10 seconds after arming the
system remotely, simultaneously press buttons II
and III on the remote control. The system
provides four indicator light flashes when the
warning zone is bypassed.
8 GP500