GP500 User's Manual

Smart prior in tru sion at tempt alert
If you hear three chirps when you remotely disarm, it means that a trigger or
sensor was activated in your absence. When you turn on the ignition (or start
the engine), the LED will flash 1-8 times, pause, then repeat the flash cycle 4
more times. Count the number of flashes in one cycle and refer to the chart
on the previous page.
Eight- Event To tal Re call™
Your GP500 system’s memory records the identity of the last eight activated
or malfunctioning triggers and sensors in reverse chronological order, which
allows your installer to instantly track down malfunctions.
1. Remotely arm and disarm while pressing and holding the unmarked
button on the PlainView 2 switch.
2. The LED will flash 1-8 times to indicate the most recently activated
point, pause, flash 1-8 times to indicate the second most recently
activated point, and so on.
3. Write down the number of flashes between pauses and refer to the chart
on the previous page.
16 GP500