User Guide

1. Open any vehicle door.

2. Press .

3. Press .

4. Press again.

The LED status indicator will light solid if you are entering Valet

Mode, or will go out if you are exiting Valet Mode.

false alarm control technology (FACT)

Your system offers FACT, a feature that prevents annoying

repetitive trigger sequences due to a faulty sensor or environmen-

tal conditions such as thunder, jackhammers, airport noise, etc.

Here’s how it works: The alarm triggers three times. Each time,

the same sensor is triggering the alarm. The three triggers are

within 60 minutes of each other. FACT will interpret this

pattern of triggers as false alarms. After the third trigger, FACT

ignores, or bypasses, that sensor (along with any other sensors

sharing the same zone) for 60 minutes.

If the bypassed sensor tries to trigger the system while it is being

bypassed, the 60-minute bypass period will start over. This

ensures that a sensor that continually triggers will remain

bypassed.

Doors are covered by FACT differently: If the alarm is triggered

by an open door for three full cycles, the doors will be bypassed

until the trigger ceases.

➜