User Guide

If the Warning Zone response is triggered, the LED will not report

it.

aannttii-ccooddee ggrraabbbbiinngg ((AACCGG))

This unit features Anti-Code Grabbing (ACG) with Random

Code Encryption. This means the receiver and transmitters each

use a mathematical formula called an algorithm to change their

code each time the transmitter is used. This technology has been

developed to increase the security of the unit. The control unit

knows what the next codes should be. This helps to keep the

transmitter "in sync" with the control unit even if you use the

note: Your system stores the last two triggered zones in

memory. If your system has been triggered but the LED

has been reset by turning on the ignition, your dealer can

still recall the last two zones that were triggered. Contact

your dealer for details.

Zone - Number Dealer-Installed

of LED Flashes Description Options

1 Instant trigger - often used

for hood/trunk pinswitches

2 Instant trigger - a heavier impact

detected by the shock sensor

3 Door switch trigger

4 Instant trigger - for optional sensors

5 Ignition trigger