User Guide

18
© 2001 directed electronics, inc.
➤➤
Power Saver when the system is armed: After the system has
been armed for 24 hours, the LED will flash at half its
normal rate, decreasing the system's current draw.
➤➤
Power Saver in Valet Mode: When the system enters Valet
Mode the LED illuminates steadily. If the vehicle is not used
(ignition is not turned on) for a period of one hour while the
system is in Valet Mode, the LED will shut off. If the system
remains in Valet Mode, the LED will come back on the next
time the ignition is turned on and then back off.
pprrooggrraammmmiinngg ooppttiioonnss
Programming options control what your system does during
normal operation, and require few or no additional parts.
However, some may require additional installation labor.
The following is a list of the program settings, with the factory
settings in
bold :
➤➤
Active arming (only with the transmitter) or passive arming
(automatic arming 30-seconds after the last door is closed).
If programmed for passive arming, a feature called Smart
Relocking will occur when the system is disarmed without
opening a door, so that the doors will automatically lock
when the system passively rearms.
➤➤
Arming/disarming confirmation siren chirps on or off.
➤➤
Auto-Lock/Auto-Unlock on or off: With this feature on, the