User Guide

19
© 2001 directed electronics, inc.
doors will lock three seconds after the ignition is turned on,
and unlock when the ignition is turned off. If your installer
is programming the security system with the Directed
®
Bitwriter or a personal computer and the TechSoft
Programmer, ignition lock and unlock are independent
features and can be programmed separately.
➤➤
Passive door locking (with passive arming) or active door
locking (only when arming with the transmitter). Passive
locking allows the vehicle's doors to lock when the security
system passively arms (after the 30 second countdown). This
feature only works if passive arming has been programmed.
➤➤
Panic mode enabled /disabled with the ignition on: Some
states have laws against siren capability in a moving vehicle.
➤➤
Forced passive arming on or off: If your security system is
programmed for passive arming and the forced passive arming
feature has been programmed on, the system will passively
arm after one hour, even if a protected entry has been left
open. This feature is useful if a vehicle door has been left ajar
when leaving the vehicle. Forced passive arming ensures that
the security system will be armed in every situation.
➤➤
Automatic Engine Disable (AED) on or off : The purpose of
this feature is to protect the vehicle from being stolen at all
note: When the system passively arms after one hour, the
entry point that has been left open, and anything con-
nected to the same zone, is bypassed and cannot trigger
the system. However, the remaining inputs to the system
are fully operational.