User Guide

5
© 2001 directed electronics, inc.
uussiinngg yyoouurr ssyysstteemm
The buttons used in the instructions in this manual correspond
to the standard transmitter configuration. If your transmitter has
been custom configured, the icons on your transmitter buttons
may not correspond to the indicated functions.
arming
You can activate, or arm, the system by pressing on your
transmitter for one second. When the system arms, you will hear
a short siren sound, or chirp, and see the parking lights flash
once. If the vehicle’s power door locks have been connected to the
system, the doors will lock.
While the system is armed, the LED status indicator will flash
approximately once per second, showing that the system is
actively protecting your vehicle. If you hear a second chirp after
arming, and see the LED status indicator flashing in groups, refer
to the Diagnostics section of this guide. This extra chirp is called
Bypass Notification.
The security system also can be programmed to arm itself
automatically (called passive arming). If the system is
programmed for passive arming, it will automatically arm 30
seconds after the ignition is turned off and the system "sees" you
leave the vehicle by opening and closing a door. Whenever the
system is in its 30-second passive-arming countdown, the LED
status indicator will flash twice as fast as it does when the system
➜